Bee Keeping - Equipment In Apparatus

It can not be insisted too strongly that the only profitable way to keep bees is in hives with movable frames. The bees build their combs in these frames, which can then, be manipulated by the bee keeper as necessary. The keeping of bees in boxes, hollow logs, or straw "skeps" is not profitable, is often a menace to progressive bee keepers, and should be strongly condemned. Bees in box hives (plain boxes with no frames and with combs built at the will of the bees) are too often seen in all parts of the country. The owners may obtain from them a few pounds of inferior honey a year and carelessly continue in the antiquated practice. In some cases this type of bee keeping does little harm to others, but where diseases of the brood are present the box hive is a serious nuisance and should be abolished.

WORKSHOP

It is desirable to have a workshop in the apiary where the crop may be cared for and supplies may be prepared. If the ground on which the hives are located is not level, it is usually better to have the shop on the lower side so that the heavier loads will be carried down grade. The windows and doors should be screened to prevent the entrance of bees. The wire cloth should be placed on the outside of the window frames and should be extended about 6 inches above the opening. This upper border should be held away from the frame with narrow wooden strips one-fourth inch in thickness so as to provide exits for bees which accidentally get into the house. Bees do not enter at such openings, and any bees which are carried into the house fly at once to the windows and then crawl upward, soon clearing the house of all bees. The windows should be so arranged that the glass may be slid entirely away from the openings to prevent bees from being, imprisoned. The equipment of benches and racks for tools and supplies can be arranged as is best suited to the house. It is a'good plan to provide racks for surplus combs, the combs being hung from strips separated the distance of the inside length of the hive.

HIVES

It is not the purpose of this bulletin to advocate the use of any particular make of hive or other apparatus. Some general statements may be made, however, which may help the beginner in his choice.

The type of hive most generally used in this country (fig. 2) was invented by Langstroth in 1851. It consists of a plain wooden box holding frames hung from a rabbet at the top and not touching the sides, top, or bottom. Hives of this type are made to hold eight, ten, or more frames. The size of frame in general use, known as the Langstroth (or L) frame (9 1/8 by 17 5/8 inches), is more widely used than all others combined. One of the best features in hive manufacture developed by Langstroth is the making of the spaces between frames, side walls, and supers accurately, so that there is just room for the easy passage of bees. In a space of this size (called a "bee space") bees rarely build comb or deposit propolis.

The number of frames used depends on the kind of honey produced (whether comb or extracted) and on the length of honey flow and other local factors. There are other hives used which have points of superiority. These will be found discussed in the various books on beekeeping and in the catalogues of dealers in bee keepers' supplies.

Whatever hive is chosen, there are certain important points which should be insisted on. The material should be of the best; the parts must be accurately made, so that all frames or hives in the apiary are interchangeable. All hives should be of the same style and size; they should be as simple as it is possible to make them, to facilitate operation. Simple frames diminish the amount of propolis, which will interfere with manipulation. As a rule, it is better to buy hives and frames from a manufacturer of such goods rather than to try to make them, unless one is an expert woodworker.

The choice of a hive, while important, is usually given undue prominence in books on bees. In actual practice experienced bee keepers with different sizes and makes of hives under similar conditions do not find as much difference in their honey crop as one would be led to believe from the various published accounts.

Hives should be painted to protect them from the weather. It is usually desirable to use white paint to prevent excessive heat in the colony during hot weather. Other light colors are satisfactory, but it is best to avoid red or black.

HIVE STANDS

Generally it is best to have each hive on a separate stand. The entrance should be lower than any other part of the hive. Stands of wood, bricks, tile (fig. 2), concrete blocks, or any other convenient material will answer the purpose. The hive should be raised above the ground, so that the bottom will not rot. It is usually not necessary to raise the hive more than a few inches. Where ants are a nuisance special hive stands are sometimes necessary.

OTHER APPARATUS